• Billet diameter 20-80mm, the length of the billet should be 2 times bigger than the diameter, adopting LTG-80-20 descaling machine
• Billet diameter 120-20mm, the length of the billet should be 2 times bigger than the diameter, adopting LTG-80-20 descaling machine
• If your billet size is bigger than above dimension, we can customize according to your special inquiry.

• If you plan to use the descaling device of forgings before forging, the descaling machine will be located between the heating furnace and forging equipment(forging press, or forging hammer)
• If you plan to use the descaling device of forgings after forging, the descaling machine will be located between the processing equipment(forging press, or forging hammer)

If not removing the scale cinder of forgings while forging, Billet surface will form folding, cracks, pits and other phenomena, The above several phenomena are very likely to cause this batch of products scrap, serious may be because of a long time without cleaning the oxide scale, so that the die life is reduced. The descaling unit for removing oxide skin can solve the above problems.

In the system of Forgings Descaling machine, The high pressure water produced by the high pressure water pump enters the nozzle of the oxide skin descaling machine, Under the action of the nozzle, the high-pressure water forms a fan shaped water beam with a great impact force and jets onto the surface of the billet (or intermediate billet). Under the action of this high-pressure fan shaped water jet stream, the iron sheet is cut, rapidly cooled, stripped from the base material, and washed away from the surface of the billet (or intermediate billet), thus cleaning the oxide skin.